Surplus to Requirements of a Surgical Instruments Manufacturer & Supplier

Featuring furnaces, shot blasters, tool room machinery and more. Please see the sale information section for any additional fees that may be applicable upon purchasing an item. NOTE: Vendor to approve all closing bids prior to Apex final invoicing.

Ended: 6th May 2025 14:00
  • site
    LOT 0
    2024 ML Furnaces Model M7 2.0kW Bench Top Furnace
    Microprocessor Based Digital Controller. Maximum Temperature 1200˚C. 2.0kW 400V 3PH. 3.7Ltr. External Dimensions (W)530 x (D)730 (H)670mm. Internal Dimensions (W)230 x (D)200 x (H)510mm. 95kg. S/No. 16231224 (2024)
    Sale has ended
  • site
    LOT 1
    2024 Guyson Euroblast 6SF Sand Blasting Machine
    Maximum Load 350kg. Maximum Air Pressure 90 psi. Maximum Air Supply 77.4 m³/hr. Cabinet Floor Height 845mm. Blast Chamber Dimensions (W)1,050 x (D)740 x (H)880mm. S/No. BW240273 (2024)
    Sale has ended
  • site
    LOT 2
    2018 Ultrawave IND3530D Ultrasonic Cleaning Tank with Digital Control
    Tank and Case Constructed From Stainless Steel. Time and Temperature Digital Control. Capacity 32Ltr. Heating Capacity > 80˚C. Ultrasonic Power 400w. Heater Power 1,000w. S/No. 059317
    Sale has ended
  • site
    LOT 3
    Bridgeport Series 1 Knee Type Universal Milling Machine with Accurite 2X Mill D200 Digital Read Out
    Table (W)1,060 x (D)230mm with 3 x 15.87mm T Slots at 63.5 Centres. Table Travel 'X'=610mm 'Y'=305mm Quill 125mm. Knee Travel 406mm. Maximum Table Load 340kg. Spindle Tooling Type R-8. Maximum Spindle Power 2HP. Speed Range 60~4,200RPM. S/N...
    Sale has ended
  • site
    LOT 4
    XYZ1500 Knee Type Universal Milling Machine with Mitutoyo ALC-3705W Digital Read Out
    Table (W)1,065 x (D)230mm with 3 x 15.87mm T Slots at 63.5 Centres. Table Travel 'X'=710mm 'Y'=305mm Quill 125mm. Knee Travel 405mm. Spindle Tooling Type R-8. Maximum Spindle Power 3.0HP. Speed Range 60~4,200RPM
    Sale has ended
  • site
    LOT 5
    Mike Lockwood Furnaces Model C/M7 2.0kW Bench Top Furnace
    Maximum Temperature 1200˚C. 2.0kW 240V 1PH. Internal Dimensions (W)230 x (D)200 x (H)510mm. External Dimensions (W)530 x (D)730 (H)670mm. S/No. S2240594
    Sale has ended
  • site
    LOT 6
    Weldability ProtectoXtract Welding/Fume Extractor
    Ø150mm x 4,000mm Duct. Filter Warning
    Sale has ended
  • site
    LOT 7
    Kemper Mobile Dust Extraction and Welding Filtration Unit with ePTFE Filter
    1.6kW Motor. Dimensions (W)450 x (D)460 x (H)600mm
    Sale has ended
  • site
    LOT 9
    2017 Toyota LHM230 2.3 Tonne Manual Material Handling Industrial Truck
    Fork Length 1,000mm. Fork Width 680mm. Maximum Lift Height 200mm. Fork Height Lowered 85mm. Ground Clearance 40mm. Wheelbase 1,170mm. Turning Radius 1,370mm
    Sale has ended
  • site
    LOT 10
    Ideal Startrite 14-T-10 Vertical Bandsaw
    Maximum Width of Bands 5/8". Band Length 112". 10 Speeds from 47~2,700 ft/min. Bed Dimensions (W)480 x (D)480mm. Throat Depth 340mm. S/No. 12389
    Sale has ended
  • site
    LOT 11
    Adcock-Shipley Model 2E Universal Knee Type Milling Machine
    Bed Size (W)1,020 x (D)255mm with 3 x 15mm T Slots at 63.5mm Centres. Speed Range with 24 Speeds 30-1,200RPM. 18 Selectable Feed Ranges 1/2~40"/min.
    Sale has ended
  • site
    LOT 12
    Adcock-Shipley Model 2E Universal Knee Type Milling Machine
    Bed Size (W)1,020 x (D)255mm with 3 x 15mm T Slots at 63.5mm Centres. Speed Range with 24 Speeds 30~1,200RPM. 18 Selectable Feed Ranges 1/2~40"/min.
    Sale has ended
  • site
    LOT 13
    F.J. Edwards The Denbigh Universal Milling Machine
    Bed Size (W)1,160 x (D)260mm with 3 x 18mm T Slots at 70mm Centres. Belt Driven. Speed Range with 9 Speeds 13~400RPM. Pneumatic Feed
    Sale has ended
  • site
    LOT 14
    F.J. Edwards The Denbigh Universal Milling Machine
    Bed Size (W)1,160 x (D)260mm with 3 x 18mm T Slots at 70mm Centres. Belt Driven. Speed Range with 9 Speeds 30~700RPM. Pneumatic Feed
    Sale has ended
  • site
    LOT 15
    F.J. Edwards The Denbigh Universal Milling Machine
    Bed Size (W)1,160 x (D)260mm with 3 x 18mm T Slots at 70mm Centres. Belt Driven. Speed Range with 9 Speeds 13~400RPM. Pneumatic Feed
    Sale has ended
  • site
    LOT 16
    F.J. Edwards The Denbigh Universal Milling Machine
    Bed Size (W)860 x (D)260mm with 3 x 18mm T Slots at 70mm Centres. Belt Driven. Speed Range with 9 Speeds 13~400RPM. Pneumatic Feed
    Sale has ended
  • site
    LOT 17
    Cincinnati Horizontal Milling Machine
    Bed Size (W)900 x (D)165mm with 3 x 15.87mm T Slots at 70mm Centres. Gear Driven. Speed Range with 16 Speeds 27~1,500RPM. Pneumatic Feed
    Sale has ended
  • site
    LOT 18
    Adcock-Shipley No.1 Universal Milling Machine
    Bed Size (W)485 x (D)180mm with 3 x 14mm T Slots at 48mm Centres. Belt Driven
    Sale has ended
  • site
    LOT 19
    Archdale Horizontal Milling Machine
    Bed Size (W)785 x (D)305mm with 3 x 14mm T Slots at 63.5mm Centres. Speed Range 40~615RPM
    Sale has ended
  • site
    LOT 20
    Herbert Horizontal Milling Machine
    Bed Size (W)450 x (D)145mm with 1 T Slot. Speed Range 100~530RPM
    Sale has ended
  • site
    LOT 21
    Edgwick No1 Simplemill Side and Face Milling Machine
    Bed Size (W)510 x (D)190mm. Speed Range 224~2,020RPM
    Sale has ended
  • site
    LOT 22
    Qualters & Smith QDM500 Bench Drill
    Spindle Taper MT3. Bed Size (W)280 x (D)290mm. Tiltable ±45˚. Quill Travel 150mm. Speed Range 500~3,000RPM. Throat Depth 200mm. S/No. 109M1559C
    Sale has ended
  • site
    LOT 23
    Air Powered Pedestal Drill
    Air Driven Quill with Coolant and Fixture Plate
    Sale has ended
  • site
    LOT 24
    Centec MkII Automill Horizontal Milling Machine
    Bed (W)600 x (D)100mm. Extensive Pneumatic Fixture Attachment
    Sale has ended
  • site
    LOT 25
    Goliath 50mm Capacity Bench Mounted Guillotine
    0~50mm Capacity. 200mm Blades. 700mm Handle. Cutting Depth Gauge
    Sale has ended
  • site
    LOT 26
    Bespoke Bench Rivetter/Press
    200mm Travel. External Cylinder Dimensions Ø130 x 225mm
    Sale has ended
  • site
    LOT 27
    F.J. Edwards The Denbigh Universal Milling Machine
    Bed Size (W)860 x (D)260mm with 3 x 18mm T Slots at 70mm Centres. Belt Driven. Speed Range with 9 Speeds 13~400RPM. Pneumatic Feed
    Sale has ended
  • site
    LOT 28
    Britan Manual Capstan Repetition Collet Lathe
    Quick Release Collet Head. Indexable 6 Station Toolpost. Coolant System
    Sale has ended
  • site
    LOT 29
    Michael Deckel Feinmechanik D-812 Tool and Cutter Grinder
    Ø100mm Wheel Capacity
    Sale has ended
  • site
    LOT 30
    Guyson Super 2 Sand Blaster with 40DC Recirculating Unit
    Blasting Cabinet Dimensions (W)610 x (D)500 x (H)1,520mm. S/No. T2X1423
    Sale has ended
  • site
    LOT 31
    Colchester Triumph 2000 Vee Flat Centre Lathe
    Burnerd Ø254mm 3 Jaw Self Centreing Scroll Type Chuck. 6" D1 Camlock Fitting with Ø55mm Spindle Bore. Bed Length 1,270mm. Spindle Speeds 16 Selectable with Range 25~2000RPM from 5.6kW Motor. Quick Change 3 Position Toolpo...
    Sale has ended
  • site
    LOT 32
    Myford Super-7 Flat Bed Manual Centre Lathe
    Ø100mm 3 Jaw Self Centreing Scroll Type Chuck with Ø20mm Spindle Bore. Bed Length 650mm. Spindle Speeds 14 Selectable with Range 27~2105RPM from 0.55kW Motor. 4 Position Toolpost. Centre Height 88.9mm
    Sale has ended
  • site
    LOT 33
    E H Jones Vee Flat Bed Manual Lathe
    Indexa Ø160mm 3 Jaw Self Centreing Scroll Type Chuck with Ø25mm Spindle Bore. Bed Length 750mm. Spindle Speeds Variable. Single Position Adjustable Toolpost
    Sale has ended
  • site
    LOT 34
    Cincinnati 10/61 PE Bench Pillar Drill
    Ø5mm Capacity. Throat 120mm. Top Bed Dimensions 150 x 150mm. Bottom Bed Dimensions 170 x 170mm. 10 Selectable Speeds 440~18,000RPM. Spindle Nose to Bottom Bed 300mm. Machine Dimensions (W)260 x (D)520 x (H)660mm
    Sale has ended
  • site
    LOT 35
    Aciera F1 Swiss Precision Horizontal Milling Machine
    Schaublin W12 Collet System. 'X'=150mm 'Y'150mm 'Z'=100mm. Speed Range with 6 Speeds 125~4000RPM. 245W Motor. S/No. A7538
    Sale has ended
  • site
    LOT 36
    Lancashire Dynamo 4794B Spot Welder
    Adjustable Timer
    Sale has ended
  • site
    LOT 37
    1984 5/8" Astra Bench Drill
    Ø15.87mm Capacity. Throat 160mm. Top Bed Dimensions 245 x 245mm. Bottom Bed Dimensions 210 x 210mm. Tilting Top Bed. Quill 150mm. Spindle MT3. 12 Selectable Speeds 250~3,000RPM. 1/2HP
    Sale has ended
  • site
    LOT 38
    Fobco Star 1/2" Bench Drill
    Ø12.7mm Capacity. Throat 155mm. Top Bed Dimensions 215 x 215mm. Bottom Bed Dimensions 220 x 220mm. Tilting Top Bed. Chuck to Bed 340mm. Spindle MT2. Speed 475~4,260RPM
    Sale has ended
  • site
    LOT 39
    3' Fly Press
    940mm Swing. 150mm Travel. Bed 520 x 340mm. Height 1,050mm
    Sale has ended
  • site
    LOT 41
    R L Edwards 60mm Capacity Pedestal Guillotine
    0~60mm Capacity. 210mm Blades. 600mm Handle
    Sale has ended
  • site
    LOT 42
    Pedestal Mounted Twin Polishing / Buffing Station
    5" Ducting. Dimensions (W)850 x (D)920 (H)600mm
    Sale has ended
  • site
    LOT 43
    Bench Mounted Twin Polishing / Buffing Station
    5" Ducting. Dimensions (W)1,000 x (D)450 (H)350mm
    Sale has ended
  • site
    LOT 44
    Pedestal Mounted Twin Polishing / Buffing Station
    5" Ducting. Dimensions (W)1,350 x (D)600 (H)1,140mm
    Sale has ended
  • site
    LOT 45
    Vertical Belt Sander with Rotating Handling System
    Belt Size 10mm x 4,000mm. 3" Motorised Chuck. Overall Size of Machine (W)1,000 x (D)450 x (H)2,000mm
    Sale has ended
  • site
    LOT 46
    Vertical Belt Sander with Rotating Handling System
    Belt Size 10mm x 4,000mm. 3" Motorised Chuck. Overall Size of Machine (W)1,000 x (D)450 x (H)2,000mm
    Sale has ended
  • site
    LOT 47
    Vertical Belt Sander with Rotating Handling System
    Belt Size 10mm x 4,000mm. 3" Motorised Chuck. Overall Size of Machine (W)1,000 x (D)450 x (H)2,000mm
    Sale has ended
  • site
    LOT 48
    Vertical Belt Sander with Rotating Handling System
    Belt Size 10mm x 4,000mm. 3" Motorised Chuck. Overall Size of Machine (W)1,000 x (D)450 x (H)2,000mm
    Sale has ended
  • site
    LOT 49
    Low Pedestal Floor Mounted Twin Polishing / Buffing Station
    5" Ducting. Dimensions (W)1,050 x (D)700 (H)540mm
    Sale has ended
  • site
    LOT 50
    Low Pedestal Floor Mounted Twin Polishing / Buffing Station
    5" Ducting. Dimensions (W)1,020 x (D)500 (H)580mm
    Sale has ended
  • site
    LOT 51
    Low Pedestal Floor Mounted Twin Polishing / Buffing Station
    5" Ducting. Dimensions (W)1,100 x (D)740 (H)590mm
    Sale has ended
  • site
    LOT 52
    Low Pedestal Floor Mounted Twin Polishing / Buffing Station
    5" Ducting. Dimensions (W)1,170 x (D)500 (H)590mm
    Sale has ended
  • site
    LOT 53
    Low Pedestal Floor Mounted Twin Polishing / Buffing Station
    4" Ducting. Dimensions (W)1,100 x (D)750 (H)560mm
    Sale has ended
  • site
    LOT 54
    Low Pedestal Floor Mounted Twin Polishing / Buffing Station
    4" Ducting. Dimensions (W)1,220 x (D)800 (H)560mm
    Sale has ended
  • site
    LOT 55
    Low Pedestal Floor Mounted Twin Polishing / Buffing Station
    4" Ducting. Dimensions (W)1,170 x (D)800 (H)560mm
    Sale has ended
  • site
    LOT 56
    Spares or Repair Low Pedestal Floor Mounted Twin Polishing / Buffing Station
    Dimensions (W)900 x (D)800 (H)580mm
    Sale has ended
  • site
    LOT 57
    Low Pedestal Floor Mounted Twin Polishing / Buffing Station
    5" Ducting. Dimensions (W)1,070 x (D)800 (H)580mm
    Sale has ended
  • site
    LOT 58
    Low Pedestal Floor Mounted Twin Polishing / Buffing Station
    5" Ducting. Dimensions (W)1,050 x (D)800 (H)580mm
    Sale has ended
  • site
    LOT 59
    Low Pedestal Floor Mounted Twin Polishing / Buffing Station
    4" Ducting. Dimensions (W)1,030 x (D)800 (H)580mm
    Sale has ended
  • site
    LOT 60
    Low Pedestal Floor Mounted Twin Polishing / Buffing Station
    4" Ducting. Dimensions (W)1,100 x (D)800 (H)580mm
    Sale has ended
  • site
    LOT 61
    Pedestal Mounted Twin Polishing / Buffing Station and Benching
    4" Ducting. Dimensions (W)2,100 x (D)750 (H)1,200mm
    Sale has ended
  • site
    LOT 62
    Pedestal Mounted Twin Polishing / Buffing Station and Benching
    4" Ducting. Dimensions (W)2,440 x (D)600 (H)1,300mm
    Sale has ended
  • site
    LOT 63
    Pedestal Mounted Twin Polishing / Buffing Station and Benching
    4" Ducting. Dimensions (W)2,440 x (D)600 (H)1,300mm
    Sale has ended
  • site
    LOT 64
    Spares or Repair Low Pedestal Floor Mounted Twin Polishing / Buffing Station
    4" Ducting. Dimensions (W)1,460 x (D)800 (H)580mm
    Sale has ended
  • site
    LOT 65
    Low Pedestal Floor Mounted Twin Polishing / Buffing Station
    4" Ducting. Dimensions (W)1,950 x (D)800 (H)580mm
    Sale has ended
  • site
    LOT 66
    Pedestal Mounted Twin Polishing / Buffing Station and Benching
    4" Ducting. Dimensions (W)1,440 x (D)700 (H)1,200mm
    Sale has ended
  • site
    LOT 66D
    DCE Donaldson Torit UMA 152 K5 Industrial Extractor Filtration Unit
    Approximate Duty 400~1,300 CFM 680~2200m³. Filter Area 15m³. 2 x Ø150mm Outlets. Dimensions (W)950 x (D)870 x (H)2,500mm
    Sale has ended
  • site
    LOT 66B
    DCE Industrial Extractor Filtration Unit
    2 x Ø150mm Outlets. Dimensions (W)1,000 x (D)770 x (H)2,300mm
    Sale has ended
  • site
    LOT 66C
    2003 DCE Donaldson Torit UMA 152 K5 Industrial Extractor Filtration Unit
    Approximate Duty 400~1,300 CFM 680~2200m³. Filter Area 15m³. 2 x Ø150mm Outlets. Dimensions (W)950 x (D)870 x (H)2,500mm. S/No. 00006848
    Sale has ended
  • site
    LOT 67
    1996 DCE Donaldson Torit Unimaster UMA 252 G5 Industrial Extractor Filtration Unit
    Approximate Duty 1200~2,400 CFM1,360~4400m³. Filter Area 25m³. 2 x Ø150mm Outlets. Dimensions (W)1,150 x (D)800 x (H)2,600mm S/No. 639885 (1996)
    Sale has ended
  • site
    LOT 68
    DCE Donaldson Torit Unimaster UMA152 K5 Industrial Extractor Filtration Unit
    Approximate Duty 400~1,300 CFM 680~2200m³. Filter Area 15m³. 2 x Ø150mm Outlets. Dimensions (W)950 x (D)870 x (H)2,300mm. S/No. 616135
    Sale has ended
  • site
    LOT 69
    DCE Donaldson Torit Unimaster UMA152 K5 Industrial Extractor Filtration Unit
    Approximate Duty 400~1,300 CFM 680~2200m³. Filter Area 15m³. 2 x Ø150mm Outlets. Dimensions (W)950 x (D)870 x (H)2,300mm. S/No. 616136
    Sale has ended
  • site
    LOT 70
    DCE Donaldson Torit Unimaster UMA72 G1 Industrial Extractor Filtration Unit
    Approximate Duty 200~525 CFM 340~1,100m³. Filter Area 6.23m³. 2 x Ø150mm Outlets. Dimensions (W)750 x (D)600 x (H)2,000mm
    Sale has ended
  • site
    LOT 71
    DCE Donaldson Torit Unimaster UMA152 K5 Industrial Extractor Filtration Unit
    Approximate Duty 400~1,300 CFM 680~2200m³. Filter Area 15m³. 2 x Ø150mm Outlets. Dimensions (W)950 x (D)870 x (H)2,300mm. S/No. 616137
    Sale has ended
  • site
    LOT 72
    2003 DCE Donaldson Torit Unimaster UMA152 K5 Industrial Extractor Filtration Unit
    Approximate Duty 400~1,300 CFM 680~2200m³. Filter Area 15m³. 2 x Ø150mm Outlets. Dimensions (W)950 x (D)870 x (H)2,300mm. S/No. 00006849
    Sale has ended
  • site
    LOT 73
    2003 DCE Donaldson Torit Unimaster UMA152 K5 Industrial Extractor Filtration Unit
    Approximate Duty 400~1,300 CFM 680~2200m³. Filter Area 15m³. 2 x Ø150mm Outlets. Dimensions (W)950 x (D)870 x (H)2,300mm. S/No. 00006844
    Sale has ended
  • site
    LOT 74
    DCE Donaldson Torit Unimaster UMA72 G1 Industrial Extractor Filtration Unit
    Approximate Duty 200~525 CFM 340~1,100m³. Filter Area 6.23m³. 2 x Ø150mm Outlets. Dimensions (W)750 x (D)600 x (H)2,000mm. S/No. 615941
    Sale has ended
  • site
    LOT 75
    DCE Donaldson Torit Unimaster UMA102 K3 Industrial Extractor Filtration Unit
    Approximate Duty 200~1,000 CFM 340~1,700m³. Filter Area 9.3m³. 2 x Ø150mm Outlets. Dimensions (W)950 x (D)870 x (H)2,300mm. S/No. 616138
    Sale has ended
  • site
    LOT 76
    2003 DCE Donaldson Torit Unimaster UMA152 K5 Industrial Extractor Filtration Unit
    Approximate Duty 400~1,300 CFM 680~2200m³. Filter Area 15m³. 2 x Ø150mm Outlets. Dimensions (W)950 x (D)870 x (H)2,300mm. S/No. 00006846
    Sale has ended
  • site
    LOT 77
    DCE Donaldson Torit Unimaster UMA152 G5 Industrial Extractor Filtration Unit
    Approximate Duty 400~1,300 CFM 680~2200m³. Filter Area 15m³. 2 x Ø150mm Outlets. Dimensions (W)950 x (D)870 x (H)2,300mm. S/No. 191519
    Sale has ended
  • site
    LOT 78
    DCE Donaldson Torit Unimaster UMA152 K5 Industrial Extractor Filtration Unit
    Approximate Duty 400~1,300 CFM 680~2200m³. Filter Area 15m³. 2 x Ø150mm Outlets. Dimensions (W)950 x (D)870 x (H)2,300mm. S/No. 616025
    Sale has ended
  • site
    LOT 79
    DCE Donaldson Torit Unimaster UMA152 G5 Industrial Extractor Filtration Unit
    Approximate Duty 400~1,300 CFM 680~2200m³. Filter Area 15m³. 2 x Ø150mm Outlets. Dimensions (W)950 x (D)870 x (H)2,300mm
    Sale has ended
  • site
    LOT 80
    2011 Oxford Precision Model 150R Firth Hardometer Bench Mounted Hardness Testing Machine
    Hardness Range 22~88HRA, 20~100HRB, 20~70HRC. Maximum Specimen Height 170mm. Throat 135mm. Dimensions (W)240 x (D)470 x (H)630mm. S/No. 0223 (2011)
    Sale has ended
  • site
    LOT 81
    Excel Gemini Autoclave PA000374
    Design Pressure 2.6 Bar. Design Temperature 145C. Maximum Rating 10 Amps. S/No. PA000374
    Sale has ended
  • site
    LOT 82
    Illuminated Adjustable Magnifying Lens
    22W Circular Tube. 240V
    Sale has ended
  • site
    LOT 83
    Electric Acid Etching Machinery
    Sale has ended
  • site
    LOT 84
    Senator 4" Bench Vice
    Sale has ended
  • site
    LOT 85
    Acvoke Adjustable 100mm Quick Release Machine Vice
    Dimensions (W)150 x (D)400 (H)90mm. Weight Approximately 15kg
    Sale has ended
  • site
    LOT 86
    Acvoke Adjustable 100mm Quick Release Machine Vice
    Dimensions (W)150 x (D)400 (H)90mm. Weight Approximately 15kg
    Sale has ended
  • site
    LOT 87
    Acvoke Adjustable 100mm Quick Release Machine Vice
    Dimensions (W)150 x (D)400 (H)90mm. Weight Approximately 15kg
    Sale has ended
  • site
    LOT 88
    Acvoke Adjustable 100mm Quick Release Machine Vice
    Dimensions (W)150 x (D)400 (H)90mm. Weight Approximately 15kg
    Sale has ended
  • site
    LOT 89
    Acvoke Adjustable 100mm Quick Release Machine Vice
    Dimensions (W)150 x (D)400 (H)90mm. Weight Approximately 15kg
    Sale has ended
  • site
    LOT 90
    Acvoke Adjustable 100mm Quick Release Machine Vice
    Dimensions (W)150 x (D)400 (H)90mm. Weight Approximately 15kg
    Sale has ended
  • site
    LOT 91
    Acvoke Adjustable 100mm Quick Release Machine Vice
    Dimensions (W)150 x (D)400 (H)90mm. Weight Approximately 15kg
    Sale has ended
  • site
    LOT 92
    Acvoke Adjustable 100mm Quick Release Machine Vice
    Dimensions (W)150 x (D)400 (H)90mm. Weight Approximately 15kg
    Sale has ended
  • site
    LOT 93
    Acvoke Adjustable 100mm Quick Release Machine Vice
    Dimensions (W)150 x (D)400 (H)90mm. Weight Approximately 15kg
    Sale has ended
  • site
    LOT 94
    Acvoke Adjustable 100mm Quick Release Machine Vice
    Dimensions (W)150 x (D)400 (H)90mm. Weight Approximately 15kg
    Sale has ended
  • site
    LOT 95
    Ø10" Precision Machine Rotary Table
    Height 180mm
    Sale has ended
  • site
    LOT 96
    Ø8" Precision Machine Rotary Table
    Height 140mm
    Sale has ended
  • site
    LOT 97
    Ø8" Precision Machine Rotary Table
    Height 140mm
    Sale has ended
  • site
    LOT 98
    Quantity of Assorted Threading Dies and Die Tools
    Sale has ended
  • site
    LOT 99
    Quantity of Assorted 1" Bore High Speed Steel Milling Cutters
    Sale has ended
  • site
    LOT 100
    Quantity of Assorted 1" Bore High Speed Steel Milling Cutters
    Sale has ended
  • site
    LOT 101
    Quantity of Assorted High Speed Steel Milling Cutters
    Sale has ended
  • site
    LOT 102
    Quantity of Assorted R-8 Milling Cutters
    Sale has ended
  • site
    LOT 103
    Quantity of Assorted 1" Bore High Speed Steel Milling Cutters
    Sale has ended
  • site
    LOT 104
    Quantity of Assorted 1" Bore High Speed Steel Milling Cutters
    Sale has ended
  • site
    LOT 105
    Quantity of Assorted 1" and 1.1/4" Bore High Speed Steel Milling Cutters
    Sale has ended
  • site
    LOT 106
    Quantity of Assorted 1" and 1.1/4" Bore High Speed Steel Milling Cutters
    Sale has ended
  • site
    LOT 107
    Quantity of Assorted 1" Bore High Speed Steel Milling Cutters
    Sale has ended
  • site
    LOT 108
    Quantity of Assorted 3/4" and 1" Bore High Speed Steel Milling Cutters
    Sale has ended
  • site
    LOT 109
    Quantity of Assorted Small Profile High Speed Steel Milling Cutters
    Sale has ended
  • site
    LOT 110
    Quantity of Assorted Small Profile High Speed Steel Milling Cutters
    Sale has ended
  • site
    LOT 111
    Quantity of Assorted High Speed Steel Milling Cutters
    Sale has ended
  • site
    LOT 112
    Quantity of Assorted High Speed Steel Milling Cutters
    Sale has ended
  • site
    LOT 113
    Quantity of Assorted High Speed Steel Milling Cutters
    Sale has ended
  • site
    LOT 114
    Quantity of Assorted High Speed Steel Milling Cutters
    Sale has ended
  • site
    LOT 115
    Quantity of Assorted High Speed Steel Milling Cutters
    Sale has ended
  • site
    LOT 116
    Quantity of Assorted High Speed Steel Milling Cutters
    Sale has ended
  • site
    LOT 117
    Quantity of Assorted High Speed Steel Milling Cutters
    Sale has ended
  • site
    LOT 118
    Quantity of Assorted High Speed Steel Milling Cutters
    Sale has ended
  • site
    LOT 119
    Quantity of Assorted High Speed Steel Milling Cutters
    Sale has ended
  • site
    LOT 120
    Quantity of Assorted High Speed Steel Milling Cutters
    Sale has ended
  • site
    LOT 121
    Quantity of Assorted High Speed Steel Milling Cutters
    Sale has ended
  • site
    LOT 122
    Quantity of Assorted High Speed Steel Milling Cutters
    Sale has ended
  • site
    LOT 123
    Quantity of Assorted High Speed Steel Milling Cutters
    Sale has ended
  • site
    LOT 124
    Quantity of Assorted High Speed Steel Milling Cutters
    Sale has ended
  • site
    LOT 125
    Quantity of Assorted High Speed Steel Milling Cutters
    Sale has ended
  • site
    LOT 126
    Quantity of Assorted High Speed Steel Milling Cutters
    Sale has ended
  • site
    LOT 127
    Quantity of Assorted High Speed Steel Milling Cutters
    Sale has ended
  • site
    LOT 128
    Quantity of Assorted High Speed Steel Milling Cutters
    Sale has ended
  • site
    LOT 129
    Quantity of Assorted High Speed Steel Milling Cutters
    Sale has ended
  • site
    LOT 130
    Quantity of Assorted High Speed Steel Milling Cutters
    Sale has ended
  • site
    LOT 131
    Quantity of Assorted High Speed Steel Milling Cutters
    Sale has ended
  • site
    LOT 132
    Quantity of Assorted High Speed Steel Milling Cutters
    Sale has ended
  • site
    LOT 133
    Quantity of Assorted High Speed Steel Milling Cutters
    Sale has ended
  • site
    LOT 134
    Quantity of Assorted Spindle Nose Tooling
    Sale has ended
  • site
    LOT 135
    Clarkeson Osborne R-8 Collet Adapter
    Sale has ended
  • site
    LOT 136
    Quantity of Assorted Tooling
    Pencil Grinders, Vice
    Sale has ended
  • site
    LOT 137
    Record No4 4" Bench Vice
    Sale has ended
  • site
    LOT 138
    Quantity of Assorted Hand Tools and 42 Piece 1/2" Socket Set
    Sale has ended
  • site
    LOT 139
    100mm Machine Vice
    Dimensions (W)190 x (D)240 x (H)75mm
    Sale has ended
  • site
    LOT 140
    Indexa Ø8" x 3" Wide 3 Jaw Self Centering Scroll Type Machine Vice
    Ø180 PCD Bolts. Ø53 Bore.
    Sale has ended
  • site
    LOT 141
    Quantity of Assorted Machine Collets and Morse Taper High Speed Steel Drills
    Sale has ended
  • site
    LOT 142
    43 Drawer Small Bench Storage Unit
    Sale has ended
  • site
    LOT 144
    (4) Square Section Steel Workbenches
    Contents Not Included. Dimensions (W)1,800 x (D)680 x (H)1,250mm. Bench Height 910mm
    Sale has ended
  • site
    LOT 145
    Square Section Steel Workbench
    Includes Air Clamping System. Footpedal. Dimensions (W)1,330 x (D)670 x (H)890mm
    Sale has ended
  • site
    LOT 146
    (4) Square Section Steel Workbenches
    NuTool CH6 Bench Grinder and Record No3 Vice Included. No Other Content Included. Dimensions (W)1,800 x (D)680 x (H)1,250mm. Bench Height 910mm
    Sale has ended
  • site
    LOT 147
    (3) Senator Mobile Parts Trolley
    Contents Included. Dimensions (W)720 x (D)370 x (H)790mm
    Sale has ended
  • site
    LOT 148
    (4) Square Section Steel Workbench
    Dimensions (W)1,800 x (D)680 x (H)1,250mm. Bench Height 910mm
    Sale has ended
  • site
    LOT 149
    (4) Senator Mobile Parts Trolley
    Contents Included. Dimensions (W)720 x (D)370 x (H)790mm
    Sale has ended