Large Sale of Injection Moulding Machines and Industrial Robots
Starts: 06 May 2026 at 13:00 BST
Ends: 11 June 2026 at 14:00 BST
Sale includes used injection moulding machines (2002–2016) from Wittmann Battenfeld, Battenfeld, Krauss Maffei, Arburg, and Engel, plus linear robots from Wittmann, SEPRO, Demag, Engel, and Arburg. Free loading onto buyers’ vehicles. Please see the sale information section for any additional fees that may be applicable upon purchasing an item. NOTE: Vendor to approve all closing bids prior to Apex final invoicing.
Share:
Showing 12 of 12 lots
- LOT 1
2016 Wittmann Battenfeld EcoPower 110/130 Injection Moulding Machine With Unilog B6P Control
Clamping Force: 110 Ton. Screw Ø22mm. Shot Volume: 41 cm3. Screw L/D Ratio: 20. Calculated Stroke Volume : 41,8 cm3. Correct Injection Pressure : 2,864 bar. Maximum Screw Speed:500 min. Screw Tongue: 150 Nm. Nozzle Path Contact Force : 250/40 mm/kN. Injection Flow Outside : 76 cm3/s. Cylinder Heating Capacity : 6,3 kW. Number Of Heating Zones : 4. Recorded Working Hours: Approx. 35,953. S/No. 137469-100 (2016). - LOT 2
2014 Arburg Model 320C 500-170 injection Moulding Machine
Clamping Force: 50 Ton. Screw Diameter : Ø25mm. Shot Weight:75g. Clamping Force:500kN. Distance Between Tie Bars: 320 × 320mm. Platen Size (H × V): 446 × 446mm. Minimum Mould Height: 200mm. Maximum Daylight Opening: 550mm. Ejector Stroke: 125mm. Maximum Shot Volume:85cm³. Maximum Shot Weight (PS): 77g. Injection Pressure: 2,000 bar. Screw Speed Maximum: 400r/min. Nozzle Stroke: 250mm. Nozzle Contact Pressure: 40.6kN. Heating Capacity: 9.4kW. Pump Drive Power: 11kW. Total Installed Power: Approx. 20.5kW. Injection Unit Thermoplastics Injection Unit, 25mm Screw, High Wear-Resistant Design. Approximately 44,124 Recorded Working Hours. - LOT 3
2010 Wittmann W853-0115 3 Axis Linear robot
With 3-Axis Stroke of 4,000mm & Maximum Payload Of 41.5kg. Axis Travel 'X'=1,500mm, 'Y'=2,600mm, 'Z'=4,000mm. 'C' Axis Pneumatic. S/No. 8T00000115 (2010). - LOT 4
2010 Battenfeld HM110/130 Injection Moulding Machine With Unilog B6 Control
Clamping Force: 110 Ton. Tie Bar Distance: 470 x 420mm. Minimum Mould Height: 275mm. Maximum Mould Height: 775mm. Platen Size : 680 x 663mm. Screw Diameter: Ø22mm. Shot Volume: 41 cm3. Opening Force: 55 kN. Opening Path: 500mm. Correct Injection Pressure: 2,864 bar. Nozzle Pressure: 47kN. Path Of The Pant : 250mm. Forward Ejector Force: 41,2kN. Reverse: 26,4kN. Maximum Mold Weight : 1,000kg. Minimum Tool Diameter: Ø315mm. Approximately 70,000 Recorded Working Hours. S/No. 132756-100 (2010). - LOT 5
2005 Krauss Maffei 500-2700 C1 Injection Moulding Machine with MC4 Control
Clamping Force: 500 Ton. Screw Diameter: Ø80mm. Opening Stroke: 1,260mm. Tie Bar Spacing (H×V): 900 × 800mm. Platen Size (H×V): 1,270 × 1,200mm. Maximum Injection Pressure 1,829 bar. Injection Volume: 1,433cm³. Shot Weight (PS): 1,304g. Electrical Equipment: Voltage: 400V/50 Hz. Approx Working Hours: 61,000. - LOT 6
2004 Engel INSERT 330H/90 Injection moulding machine With CC100 Control
Rotary Table Ø1,100mm. Clamping Force: 90 Ton. Opening Maximum: 570mm. Opening Minimum: 270mm. Platen Size: 590 x 340mm. Screw: Ø40mm. Screw Length: 160mm. Injection Volume: 201cm3. Injection Pressure: 1,230 bar. Motor:15kW. Height 2,800mm. - LOT 7
2011 Arburg Multilift Select 15 (3) Axis Linear robot
Reach: 2,800mm. Maximum Payload: 15kg. Axis Travel 'X'=900mm, 'Y'=1,400mm, 'Z'=2,800mm. - LOT 8
2015 Sepro Success 7 S3 Trans Visual 2 Linear Cartesian Robot
Number Of Axis: 3. Reach: 1,000mm. Maximum Payload: 3kg. Axis Travel 'X'=1,000mm, 'Y'=400mm, 'Z'=800mm. R1=0-90. - LOT 9
2002 Engel ES200/45VTHL-PRO-ELAST Injection moulding machine
Approximate Overall Dimensions (L x W x H): 2,300 x 2,850 x 3,100mm. Approximate Weight: 6,500 kg. S/No. 46476 (2002). - LOT 10
2014 Engel Viper 20 Linear robot
Axis Travel 'X'=Demolding Stroke 700mm, 'Y'=1,500mm, 'Z'=2,360mm. 'X' Axis Reach From Fixed Platen 925mm. 'C' Axis Pneumatic Swivel. Nominal Payload 25kg. IMM Clamping Force 55-340 US Tons. S/No. 196409 (2014). - LOT 11
2011 SEPRO Axes S33 Linear Cartesian 3 Axis, Pneumatic Wrist Robot With Touch 2 Control
Axis Travel 'X'=4,000mm, 'Y'=650mm, 'Z'=1,800mm. Maximum Payload :12kg. Working Pneumatic Pressure: 6 bar ±10%. Maximum Pneumatic Pressure: 7 bar. Average Air Consumption: 140 l/min. Peak Air Consumption: 1,360 l/min. S/No. P17721 (2011). - LOT 12
2005 Demag (Wittmann) W710-0126 3 Axis Linear Robot
Axis Travel 'X'=600mm, 'Y'=800mm, 'Z'=1,500mm. S/No.W710-0126 (2005).
Essential Information
General Information
- Auction Dates
- Starts: 06 May 2026 at 13:00 BSTEnds: 11 June 2026 at 14:00 BST
- Site Address
- Sedlicna 3011Trencianske Stankovce913 11 Slovak Republic
- Viewing Days
- By Appointment OnlyViewings strictly by appointment only – Please contact Apex to make an appointment.
Fees & Payment
- Currency
- EUR
- Buyers Premium
- 18% or as specified on individual items
- Payment
General payment information
- Payment is due immediately on receipt of invoice.
- All payments must be made in the currency on the invoice issued.
- Accepted forms of payment are bank transfer ONLY. We do NOT accept payment by card, cash or cheque.
Goods
- Clearance days
- 22 June 2026 at 09:00 BST - 03 July 2026 at 15:00 BSTCollections strictly by appointment only.
- General Collection Information
Collection
- Buyers are fully responsible for removal of items plus all shipping and rigging charges.
- Items are only available to collect once the transfered funds have cleared, and a collection appointment has been booked.
- Buyers or third party movers must present an invoice to the on-site personnel when removing their items.
- Buyers must complete the removal of items within the clearance deadline. Normal removal hours are Monday to Friday, from 9am to 4pm (local time) unless otherwise stated.
- Contact and removal information will be emailed at the time invoices are issued.
- Sales Contacts
- Auction informationKarla Swain69 Middle Street
Brighton
BN1 1AL
United Kingdom info@apexauctions.co.uk+44 1273 224466